Description:

The Cavallino Splash, a dedicated 10-class water plane, is a laser-cut balsa kit and comes with its own float as an assembled kit.
This kit is recommended for those who are not tired of film-applied finished aircraft. The plank material on the back of the fuselage is pre-bent.
The 2C-10 class engine is suitable (muffler extension is required for sideways mounting).
Can also be assembled as a 300W-class electric version. The ER-221912dBM brushless motor allows the motor to be mounted from the front of the cowling without removing the cowling.
The special float is made of unsinkable combination of styrofoam and balsa.
The kit also comes standard with 10-15 engine mounts and glass cowling.

Suitable for intermediate level fliers.
Balsa assembly kit
Glow engine version
Electric version

< Technical Data >

Overall length : 889mm
Overall width : 964mm
Wing area : 16.6dm2
Overall weight : 850-950g
Power: Brushless motor ER-221912dBM
            or Glow engine 2C-10 class
RC mechanism : 4 to 5ch-3 to 5 servos
Control : AL, RD, EV, TH or ESC

< Items required before flight >

[Common items]
Aircraft radio transmitter/receiver (not for Parkfly)
Extension cord PILOT ST100mm (47498) x1 for aileron servo
Covering film A-film, etc.
PILOT Sponge Tire 45mm 2pcs (33118)
PILOT Sponge tire, 15mm, 2pcs (33220)
PILOT AB spinner 38mm white (33315) red (33316) carbon pattern (33381)
Hinge PILOT Easy Hinge S (32002)
Linkage Parts PILOT Single Thread Piano Wire 20/35 (33206)
Linkage Parts PILOT Plastic Parts Tree (33186)
PILOT Wheel Stopper Inner Diameter 3.1mm (33338)
PILOT VIP Iron Type-R (47058) Type-F (47826)
HD heat gun for film application (47404)
Scissors PILOT Serrated scissors (47783)
Asuka Film Bond(48259)
Instant adhesives OK Bond BW (43009), HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT Balsa Canner (47875)
PILOT Sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
Stickers can be downloaded from support page (https://www.okmodel.co.jp/download/index.html).

[For electric specification]
The material for the veneer motor mounting stand is included in the kit.
Servo Tahmazo TS-D1134MG(48908)x3 pcs.
Motor Tahmazo ER-221912dBM(48873) with back mount and mounting screws*.
Speed controller Tahmazo Pro.C A-30 (48827)*
Battery LP-3S1P2200RE (48865)*
Propeller APC propeller 8x4E (46381)*
Propeller adapter PILOT PA3.18C6D (47628)*
Connector PILOT Gold Connector 4.0BL (33234)*
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
PILOT ePack 15 (25202) is a recommended product that includes the items marked with * with solder.

[For engine specification]
Receiver battery
Servos Tahmazo TS-D1134MG (48908) x 4 for engine specification
Engine: 2-cycle, 10-class
Silicon adhesive
Fuel tank PILOT fuel tank 120cc (33017)
Silencer
Extension
Adapter
APC propeller 7×4 (46053)
Fuel tube PILOT silicon tube pink 1m (33333) or blue 1m (33334)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)

<Main Set Contents>

Laser cut wood material
Plank wood (body is pre-bent)
Glass cowling
Plastic canopy
Main and tail gears
Glass nylon engine mounts
Styrofoam float core
Carbon fiber struts
Veneer mounting base for electric power
Drawings (with Japanese assembly instructions)

*This aircraft is a balsa assembly kit.
*The aircraft in the photo is an example of a kit assembled and finished with film applied.
*There are many parts that require skill and experience for production.