Description:

The Seduction series was born with the design concept of a sports plane plus α, and has become the talk of the world.
The Seduction 123 is a sports plane with a wingspan of 123 cm, a 2C-25 class engine, and a brushless motor for nimble flight.
Materials cut by the world's best laser processing technology ensure accurate assembly. A dedicated power unit was also developed at the same time.
The Seduction 123 is an easy-to-use aircraft that offers the flight performance of a state-of-the-art electric airplane that surpasses an engine-powered airplane.

Suitable for intermediate level fliers.
Balsa assembly kit
Glow engine model
Electric power

< Technical Data >

Overall length 1246mm
Overall width 1230mm
Wing area 30.0dm2
Overall weight 1600-1700g
Power Brushless motor ER-281411dBM
 or Glow engine 2C-20 4C-40 class
Control AL(2), RD, EV, TH or ESC

< Items required before flight >

[Common items]
Aircraft radio transmitter/receiver (not for Parkfly)
PILOT ST100mm (47498) x 2 extension cords for receiver and aileron servo
PILOT ST200mm (47499) x 2 extension cords for aileron servos
Covering film A-film, etc.
PILOT sponge tire 50mm (33119) x 2
Tires PILOT Sponge tires 25mm 2pcs (33221)
Spinner PILOT AB Spinner 51mm black (33175) Available in white, red, yellow, carbon pattern, chrome and chrome blue.
Hinge PILOT EZ Hinge S (32003)
Linkage Parts PILOT Single Thread Piano Wire 20/35 (33206)
Linkage Parts PILOT Plastic Parts Tree (33186)
Parts Wheel stopper inner diameter 2.1mm
PILOT VIP Iron Type-R (47058) Type-F (47826)
HD heat gun for film application (47404)
Scissors PILOT Serrated scissors (47783)
Asuka Film Bond(48259)
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT Balsa Canner (47875)
PILOT Sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
Stickers can be downloaded from the support page.

[In case of electric specification] 
Servo Tahmazo TS-D1134MG (48908) x 4
Motor Tahmazo ER-281411dBM(48802)*
Speed controller Tahmazo Pro.C A-40 (48828)* 

Battery LP-3S1P3200RE (48857)*  
Motor mount PILOT aluminum post motor mount 2553-45 (33357)* 
(Note) A spacer about 12 mm thick made from a scrap piece of veneer or the like must be inserted between the post mount and the first fuselage frame.
Propeller APC propeller 10x7E (46386)※ Propeller adapter PILOT PA
Propeller adapter PILOT PA4C6D (47647)*
Connector PILOT Gold Connector 4.0BL (33234)* 
Hook and loop fastener tape PILOT Tape fastener (with glue) red (33399), blue (33400) or yellow (33401)
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
*PILOT ePack 25 (25201) is a recommended product that includes the items marked with * with solder.

[In case of engine specification]
Receiver battery
Servo Tahmazo TS-D1134MG (48908) x 5 pcs.
Engine: 2-cycle 25-class, 4-cycle 40-class
APC propeller 9x5 (46068) for 2C-25 engine
Fuel tank PILOT fuel tank 220cc(33019)
Fuel tube PILOT silicon tube, 2 colors, 1m each (33335)
Silicon adhesive
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)

<Main Set Contents>

Laser cut wood materials
Balsa plank wood
Plastic canopies
Plastic cowling
Polypropylene foil pants
Duralumin main gear,
Duralumin main and tail gears
Engine radial mounts
Drawings (with assembly instructions in Japanese)

* This fuselage is a balsa assembly kit.
*There are many parts that require skill and experience to build.