Description:

The “Xtract”, an aircraft developed for entry-level gasoline engine aircraft, is finally available for sale.
It was designed not as a complete scale aircraft but as a semi-scale sport plane in the image of the actual Extra 260.
It was designed in-house, and after repeated test flights over a long period of time, the details of the wing shape, tail area, mounting angle, upswing angle, fuselage and main wing rigidity were tuned before production.
You will enjoy the performance that responds directly to the pilot's control, which cannot be obtained by simply scaling down the actual aircraft.
The wing is a single-piece wing, so even those who are new to gasoline-powered aircraft will not be confused.
Of course, it is possible to install a Globe 90-120 class engine.
OK Models has designed not only the fuselage but also the engine, propeller, and power supply system in total.

Suitable for intermediate to advanced level fliers.
Completed with film applied
Gasoline engine
Glow engine specification

< Technical Data >

Overall length 1550mm
Overall width 1610mm
Wing area 53.4dm2
Overall weight 3800-4000g
Gasoline engine DLE-20, 20RA, or glow engine 4C90-120,
 or glow engine 4C90-120
Controls AL(2), EV, RD, TH,

< Items required before flight >

Propo transmitter/receiver for airplanes
Servos: 5 standard servos*.
PILOT ST100mm (47498) x 2 extension cords (for receiver connection)
PILOT ST200mm (47499) x 2 extension cords (for aileron)
2 x PILOT ST400mm (47501) extension cords (for rudder and elevator)
*Standard servos are servos with a width of 20mm, length of 40mm, and torque of 3.5kg or more manufactured by a radio manufacturer.

[In case of DLE20 engine]
DLE-20 gasoline engine (47747)
Propeller APC propeller 16x8 (46048)
Fuel tube for kickit gasoline ø3/5mm (47794)

[In case of glow engine]
Engine 4-cycle 90-120 class
Fuel tank Tank suitable for the engine (for glow fuel)
Propeller Propeller suitable for the engine
Fuel tube PILOT silicon tube Pink 1m (33333)
Or PILOT silicon tube pink blue 1m (33334)

[Electrical parts]
(For gasoline engine equipped models)
On-board lipo meter S (48823)
Switch G for power harness (48819)
On-board tachometer (47735)
kickit Remote Kill Switch (47736)
Tahmazo SVR3-6V2(48882)
LiPo battery Tahmazo LP-3S1P1000RIG (48792)

<Main Set Contents>

Balsa veneer film-applied main wings
Balsa veneer film-applied tail fins
Balsa veneer fuselage, pre-finished with balsa veneer film
Glass cowling
75mm AB spinner
Plastic canopy
Fuel tank (for gasoline)
20cc 2-part engine mount (not pictured)
Linkage rods
Jura main gear
Tail gear
Sponge tires
Control horn
Color stickers
Japanese assembly manual

*This product is a film-applied complete ARF airplane. Some work is required to complete the airplane, such as joining the main wings and loading the engine and mechanical components.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.