Description:

The birth of Japan's original 25-class sport plane. The thin, perfectly symmetrical main wing with a sufficient area of recession angle provides not only high-speed flight but also excellent low-speed stability. It is a sport plane that can be easily flown. The simple structure can be modified with a cowling and cockpit. It can also be easily converted to electric power with the use of E-Pak 25.

Three different color schemes inspired by the pre-WWII Cup racers are available, so you can enjoy not only flying solo, but also racing with your friends!
The numbers in the kit are random. If you want to change the number to your favorite one, please download it from our WEB site and cut cutting sheets, etc. to make your own.

Suitable for intermediate level users.
Completed with film applied
Glow engine type
Glow engine type

< Technical Data >

Overall length 1150mm
Overall width 1260mm
Wing area 25.2dm2
Overall weight 1350-1450g
Power Brushless motor ER-281411dBM
 or Glow engine 2C25 class
Control AL(2), EV, RD, TH or ESC

< Items required before flight >

Propo transmitter/receiver for airplanes
Servos Standard servos* x 3
Mini Servo Tahmazo TS-D1134MG (48908) x 2
Engine: 2-cycle, 25-class
APC propeller 9x5 (46068) 2 cycle 25 class
PILOT ST200mm (47499) x2 PILOT ST100mm (47498) x2 
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesive (30-minute curing type)
Silicone adhesive
PILOT sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
*Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more manufactured by a radio manufacturer.
*If you choose electric power as the power source, you can use ePack25 for easy operation.

<Main Set Contents>

Balsa ribbed main wings with film applied
Balsa ribbed tail wing with film applied
Wooden film-applied fuselage
Glass nylon engine mount
51mm AB spinner
180-cylinder fuel tank
Linkage rods
Main gear
Sponge tires
Plastic control horn
Stickers (numbered at random)
Japanese assembly manual

*This product is a film-applied finished ARF airplane. Some work is required to complete the airplane, such as joining the main wings, engine, and mechanical components.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.