Description:

"SKYLOOP 148" has added a retro taste to the commander such as the open nose, wing tip aileron, and fabric covering style fuselage.

The two-split main wing with carbon pipe Kanzashi, the adoption of the screw type horizontal stabilizer and the bonded vertical stabilizer eliminates the need for assembly and bonding while checking the troublesome alignment. The semi-symmetric airfoil and rectangular wing provide outstanding stability.

Completed balsa rib set film pasting, this is a combination of the main tail and the wooden film pasting fuselage. The simple structure makes mechanical stacking and maintenance easy. You can easily take off and land with the 3-wheel type legs. Since the upper surface of the fuselage at the rear of the engine is a hatch, it can be easily electrified.
Made in Japan.

  * PILOT e-Pack 45 is recommended for electrification.

For intermediate level users
Film application completed
Glow engine type
Electric specification

< Technical Data >

Overall length 1250mm
Overall width 1480mm
Wing area 40.5dm2
Overall weight 2000-2200g
Power: Brushless motor ER-352077dBM
　or Glow engine 2C-40~45, 4C-40~50 class
Control AL(2), EV, RD, TH or ESC

< Items required before flight >

[Common accessories]
Propo transmitter/receiver for airplanes
Extension cord PILOT ST200mm (47499) x2 for connection of receiver and aileron
Instant adhesive OK Bond HW (43010), FX (43451)
Epoxy adhesive (30-minute curing type)
Pilot sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)

[For electric models] 
Servos: 2 standard servos*, 2 mini servos
Motor Tahmazo ER-352077dBM(48766)
Motor mount PILOT aluminum post motor mount (33348)
Speed controller Tahmazo Pro.C A-50(48829)
Battery LP-4S1P5000RE (48870)
Propeller APC propeller 11x8E (46421)
Propeller adapter PILOT PA5C8D (47455)
Connector PILOT Gold Connector 4.0BL (33234)
Hook and loop fastener tape PILOT Tape fastener (with glue) Red (33399), Blue (33400) or Yellow (33401)
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
Standard servo is a servo with a width of 20mm, length of 40mm, and torque of 3.5kg or more made by a radio manufacturer.
*If you use ePack45 (25203), it is easy because all the necessary parts for electric conversion are included in the kit.

[For engine specifications]
Receiver battery
Servos: 2 standard servos*, 3 mini servos
Engine 2-cycle 40-45 class 4-cycle 40-50 class
APC propeller 11x6 (46082) 2 cycle 12x6 (46086) 4 cycle
Fuel tube PILOT silicon tube 1m each in 2 colors (33335)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)
*Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more, manufactured by a radio manufacturer.

<Main Set Contents>

Completed fuselage with film attached
Completed main and tail wings with film attached
Canopy
320cc fuel tank
Three 55mm sponge tires
Nose gear and main gear
57mm AB spinner
Linkage parts
Color sticker
Japanese assembly manual

*This product is a film-applied complete ARF airplane. Some work is required to complete the airplane, such as joining the main wings, engine, and loading the mechanical parts.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.