Description:

Pilot's “Zero Fighter Type 22” uses reliable data from the actual aircraft to reproduce the cowling and canopy shape, not to mention the distinctive tail wing planform and even the fillets, in full scale.
The retractable legs can also be equipped, realizing the flight performance of the real aircraft and the unimaginable stability of flight performance.
The laser-cut design also makes it easy to build. For example, the main wing ribs have support tabs, and the ribs, spar, leading edge, and trailing edge are all inlaid. Simply insert each in turn and apply instant adhesive to complete the precise main wing framework.

To complete the fuselage, glue, covering film, tires, etc. are required.
A radio transmitter/receiver for airplanes is required for flight.

Suitable for intermediate level fliers.
Balsa assembly kit

< Technical Data >

Overall length 990mm
Overall width 1320mm
Wing area 27.0dm2
Overall weight 1800~2000g
  Power Glow engine Electric motor
  Controls AL(2),RD,EV,RG,TH or ESC

*Beginners are not allowed to assemble or fly.
*Beginners are not allowed to assemble or fly this model.

< Items required before flight >

Propo transmitter/receiver for airplanes
Receiver battery
Servos Mini servos* x5
Spinner PILOT 51mm aluminum spinner for Zero fighter (33311)
ePack25 (25201)
PILOT ELF retract main (47690)
PILOT Sponge Tire 55mm 2pcs (33120)
PILOT Sponge Tire 25mm 2pcs (33221), 1pc to be used
Covering film A film AF66 gray (17332), S film SF09 dark green (17353), etc.
Hinge PILOT EZ Hinge Small (32003)
Linkage Parts PILOT Plastic Parts Tree (33186)
Asuka Film Bond (48259)
Instant adhesives OK Bond BW (43009), HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)

[In case of engine specification]
Engine: 2-cycle, 30-class, 4-cycle, 50-class
APC propeller 9×5 (46068) 2 cycle 10×6 (46077) 4 cycle
Fuel tank PILOT fuel tank 220cc (33019)
Fuel tube PILOT silicon tube, 2 colors, 1m each (33335)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)

<Main Set Contents>

Laser cut wood materials
Balsa plank wood
Plastic canopies
Plastic cowling
Tailgear
Color stickers
Drawings (with Japanese assembly instructions)

*This aircraft is a balsa assembly kit.
*The aircraft in the photo is an example of the kit assembled and finished with the film applied.
*The aircraft in the photo is an example of a kit assembled and finished with film applied.
*There are many parts that require skill and experience to build.