Description: 

Reproduction of the Extra 260 aerobatic aircraft as a Globe 4-cycle 120-160 class semi-scale aircraft. The single wing structure is strong enough to fly at full power. A 500cc tank for glow fuel is standard equipment. The cockpit is easily detachable with the canopy latch, so it can be electrically powered.

You will enjoy the performance that responds directly to the pilot's control, which cannot be obtained by simply scaling down the actual aircraft.

Suitable for intermediate to advanced level pilots.
Completed with film applied
Electric/Glow/Gasoline engine

< Technical Data >

Overall Length : 1550mm
Wing Span : 1610mm
Wing Area : 53.4dm2
Weight : 3500-3800g
Engine: Glow engine 4C 120-140 class or 20cc gasoline engine
RC Mechanical Radio: AL(2),RD,EV,TH

< Items required before flight >

Propo transmitter/receiver for airplanes
Servos: 5 standard servos*.
PILOT ST100mm (47498) x 2 extension cords (for receiver connection)
PILOT ST200mm (47499) x 2 extension cords (for aileron)
2 x PILOT ST400mm (47501) extension cords (for rudder and elevator)
*Standard servos are servos with a width of 20mm, length of 40mm, and torque of 3.5kg or more manufactured by a radio manufacturer.

[In the case of glow engine installation]
Engine 4-cycle 120-140 class
Propeller: Propeller suitable for the engine
Fuel tube PILOT silicon tube pink 1m (33333)
　Or PILOT Silicon Tube Pink Blue 1m (33334)

[In case of gasoline engine]
Engine DLE-20 gasoline engine (47747)
Propeller APC propeller 16x8 (46048)
Fuel tube Kickit fuel tube for gasoline ø3/5mm (47794)
Fuel tank: Tank (for gasoline) appropriate for the engine

[Parts for electrical components]
(In case of gasoline engine)
On-board lipo meter S (48823)
Switch G for power harness (48819)
On-board tachometer (47735)
kickit Remote Kill Switch (47736)
Tahmazo SVR3-6V2(48882)
LiPo battery Tahmazo LP-3S1P1000RIG (48792)

<Main Set Contents>

Balsa veneer film-applied main wings
Balsa veneer film-applied tail fins
Balsa veneer fuselage, pre-finished with balsa veneer film
Glass cowling
75mm AB spinner
Plastic canopy
500cc fuel tank (for glow in the dark)
Two-piece glass nylon engine mounts
Linkage rods
Jura main gear
Tail gear
Sponge tires
Control horn
Color stickers
Japanese assembly manual

*This product is a film-applied complete ARF airplane. Some work is required to complete the airplane, such as joining the main wings and loading the engine and mechanical components.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.