Description:

The Maverick 404, a laser-cut balsa kit, 25-class retro sport plane, is a completely new design of a retro aircraft.
This balsa kit is designed to suit the 4-cycle 40 class, and can be easily converted to electric power by using the ePack25. Enjoy the silhouette that makes you think that a single stick radio might be suitable.

Suitable for intermediate level users.
Balsa assembly kit
Glow engine version
Electric model

< Technical Data >

Overall length 1040mm
Overall width 1448mm
Wing area 31.0dm2
Overall weight 1600-1700g
Power: Brushless motor ER-281411dBM or Glow engine 4C-40 class 2C-25 class
Control channels AL(2), RD, EV, RG, TH or ESC

Please refer to the manufacturer's catalog page for details.

This aircraft is a balsa assembly kit.

There are parts that require skill and experience for production.
The fuselage in the photo is an example of a kit assembled and finished with film.
Film and adhesives are not included in the kit.
When using ELF retracts with electric specifications, the BEC of the speed controller may be insufficient. Please use a switching regulator.

Please purchase legs separately.

The contents, design, and colors of the set are subject to change without notice.

< Items required before flight >

[Common items]
Aircraft radio transmitter/receiver (not for Parkfly)
PILOT ST100mm (47498) x 2 extension cords for receiver and aileron servo
PILOT ST200mm (47499) x 2 extension cords for aileron servos
Covering film A-film, etc.
PILOT Sponge tire 70mm 2pcs (33358)
PILOT Sponge tire 25mm 2pcs (33221)
Hinges PILOT Easy Hinge L (32001)
Rod adjuster PILOT HD rod adjuster 210 (33422)
Linkage Parts PILOT Plastic Parts Tree (33186)
Parts Wheel Stopper Inner Diameter 2.1mm (33336)
PILOT VIP Iron Type-R (47058) Type-F (47826)
HD heat gun for film application(47404)
Asuka Film Bond (48259)
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT Balsa Canner (47875)
PILOT Sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
Stickers can be downloaded from support page (https://www.okmodel.co.jp/download/index.html).

[In case of electric specification] 
Mini Servo Tahmazo TS-D1134MG(48908)x4 pcs.
Motor Tahmazo ER-281411dBM (48802)*
Speed controller Tahmazo Pro.C A-40 (48828)*
Battery LP-3S1P3200RE (48857)* 
Motor mount PILOT aluminum post motor mount 2553-45 (33357)*
Propeller APC propeller 10x7E (46386)* 
Propeller adapter PILOT PA4C6D (47647)*
Connector PILOT Gold Connector 4.0BL (33234)* 
Hook and loop fastener tape PILOT Tape fastener (with glue) Red (33399), Blue (33400) or Yellow (33401)
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
PILOT ePack 25 (25201) is a recommended product that includes the items marked with * with solder.

[In case of engine specification]
Receiver battery
Mini Servo Tahmazo TS-D1134MG (48908) x 5 pcs.
Engine: 2-cycle 25-class, 4-cycle 40-class
APC propeller 10x5 (46076) for 4C-40 engine
Fuel tank PILOT fuel tank 180cc(33018)
Fuel tube PILOT silicon tube, 2 colors, 1m each (33335)
Silicon adhesive
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)

<Main Set Contents>

Laser cut wood materials
Balsa plank wood
Plastic windshield
Plastic cowling
Duralumin main gear,
Duralumin main and tail gears
Radial mount for engine
Drawings (with assembly instructions in Japanese)

*This fuselage is a balsa assembly kit.
*The fuselage in the photo is an example of a kit assembled and finished with film applied.
*There are many parts that require skill and experience to build.