Description:

This is a half-fabric completed electric training plane developed for modelers who are assembling balsa kits for the first time.
By using laser cutting to accurately cut out and process parts, as well as pre-assembling the main parts, the balsa kit can be built with confidence, eliminating the mistakes and problems that often occur to beginners, such as attaching the side thrust of the motor backwards or making two main wings on the same side.
The design of the kit has been carefully considered to make it easy to apply the film, so there is no need to worry about applying the film for the first time.
The Japanese assembly instruction manual with detailed photos and illustrations is included, making this the perfect aircraft for those who want to try their hand at building balsa kits.
The old-timer style design offers outstanding stability, while the full know-how of OK Models makes it easy to control.

Suitable for beginners
Balsa assembly kit
Electric-powered

< Technical Data >

Overall length 895mm
Overall width 1420mm
Wing area 25.3dm2
Flight weight 500 to 600g
Power Tahmazo Apollo motor
Control channels: RD, EV, ESC
Main wings cannot be split after completion. Wing width is 1420mm.

Please refer to the manufacturer's catalog page for details.

< Items required before flight >

Propo transmitter/receiver for airplanes (not for Parkfly)
Motor Tahmazo Apollo Motor 38V-1150 7×4.5 Set (48761)
Speed controller Tahmazo Pro.C A-15 (48826)
Battery Tahmazo LP-3S1P1000RE (48863)
Servo Tahmazo TS-D1132MG (48907) 2 pcs.
Connector PILOT Gold Connector 4.0BL (33234)
Covering film PILOT Olympia film set (33393)
 or A-film, each color.
PILOT Sponge Tire 45mm 2pcs (33118)
PILOT Wheel stopper inner diameter 3.1mm (33338)
PILOT Easy Hinge S (32002)
Wing Stopper Rubber Pilot Wing Stopper Rubber Band 32pcs (33392)
PILOT Tape Fastener (with glue) Red (33399), Blue (33400) or Yellow (33401)

Please prepare the following as needed
Tahmazo LiPo battery charger (48451)
PILOT sanding block (25042), PILOT balsa canner (47875)
PILOT VIP Iron Type-R (47058) or Type-F (47826)
HD heat gun for film application (47404)
Scissors PILOT Serrated scissors (47783)
Wood glue Asuka Sun Double Bond (48254)
Instant adhesives OK Bon HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
Other general tools (cutter knife, screwdriver, etc.)
Stickers can be downloaded from the support page. (Included in the film set for Olympia)

<Main Set Contents>

Semi-assembled fuselage
Semi-assembled inner wing (right and left). 1 each
Other wooden parts required for assembly
Piano wire main gear
Water line for linkage
Canopy latch
Drawings (with assembly instructions in Japanese)

This product is a half-finished balsa kit.
Important parts have already been assembled at the factory so that even inexperienced fliers can assemble it accurately and without error.
**Completion of the fuselage, application of the film, and loading of the motor and mechanical components are required before the flight.