Description: 

We have made an actual light aircraft “bush plane” into a radio-controlled airplane.
We did not just make it look good, but modeled its flight performance.
Discover short takeoffs and landings, precision pinpoint landings, and other fun features that have never existed in a sports plane before.

The original airfoil shape is equipped with leading edge slats to control wing tip stall.
Large flapperon design with flaps and ailerons.
The luxurious equipment such as clear windshield and side windows, large-diameter lightweight tires, and Dura main gear are also very attractive.
The windshield is a hatch, so of course it is possible to convert it into an electric model.

Suitable for intermediate to advanced level users.
Completed with film applied
Glow engine type
Electric specification

< Technical Data >

Overall length 936mm
Overall width 1370mm
Wing area 27.0dm2
Overall weight 1400-1600g
Power Brushless motor ER-281411dBM
 or Glow engine 2C25 class
Control AL(2), RD, EV, TH or ESC

< Items required before flight >

Propo transmitter/receiver for airplanes
Servos Standard servos* x 3
Mini Servo Tahmazo TS-D1134MG (48908) x 2
Engine: 2-cycle, 25-class
APC propeller 10x4 (46075) 2 cycle 25 class
Extension cord PILOT ST100mm (47498) x4 pcs. 
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesive (30-minute curing type)
Silicone adhesive
PILOT sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
*Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more manufactured by a radio manufacturer.
*If you choose electric power as the power source, you can easily use ePack25.

<Main Set Contents>

Balsa ribbed main wings with film applied
Balsa ribbed tail wing with film applied
Wooden film-applied fuselage
Transparent windshield and side windows
Glass nylon engine mount
45mm AB spinner
180-cylinder fuel tank
Linkage rods
Dura main gears
89mm lightweight tires
Plastic control horn
Sticker
Japanese assembly manual

*This product is a film-applied complete ARF airplane. Some work is required to complete the airplane, such as joining the main wings and loading the engine and mechanical components.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.