Description: 

Electric tailless sport plane “Fageira”. It is a simple sport plane with only elevons and motor control. All you need is a radio with delta wing mixing. No complicated mixing is required.

Using an Apollo motor and a 3-cell 1500mAh LiPo, a light sport flight of about 10 minutes is possible.

It is also lightweight, so slope soaring is also possible.

Suitable for intermediate and advanced fliers.
Completed with film
Electric specification

< Technical Data >

Overall length 636mm
Overall width 1260mm
Wing area 25.5dm2
Overall weight 600-630g
Power Tahmazo Apollo motor 38V-1150 7×4.5 set
Controls AV(2),ESC

The main wings cannot be split after completion.

< Items required before flight >

Propo Transmitter for Airplane
Small receiver
Tahmazo TS-D1114MG(48906)x2 servos for aileron
Two Tahmazo TS-D1132MG (48907) servos for tail wing
Speed controller Tahmazo Pro.C A-30 (48827)
Battery Tahmazo LP-3S1P1000RE(48863) or Tahmazo LP-3S1P950RE(48862)
Battery charger Tahmazo LiPo charger (48451)
PILOT ST100mm (47498) x 2 extension cords for connecting aileron and receiver
Two PILOT ST300mm (47500) extension cords for aileron extension
PILOT Gold connector 4.0BL (33234) for connecting battery and speed controller
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesive (30-minute curing type)
Sanding block (25042)
Sandpaper
Soldering tools (soldering iron, solder with resin, etc.)
Other general tools (cutter knife, screwdriver, etc.)

<Main Set Contents>

Glass fuselage with carbon fuselage boom already attached
Balsa ribbed main wing with film already applied
Balsa tail wing with film applied
Plastic canopy
Linkage rods
Control horns
Brushless motor Tahmazo ER-221210d (48800)
Folding Peller Blade Tahmazo 10x6 Folding Peller Blade (48690)
Spinner Hub Set Tahmazo AT38/8C3.18SM(48806)
Japanese assembly manual
Color stickers

*This product is a film-applied complete ARF airplane. Some assembly work is required to complete this product, such as joining the main wings and loading the motor, radio receiver, servos, etc.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.