Description: 

[Comfortable maneuvering of 1/14RC trailers and 1/16RC tanks. ]

This 4-channel radio set was developed to include a wide variety of action in the operation of 1/14RC Big Truck, 1/16RC Tank, and other 1/10RC pickup trucks, and to comfortably control MFC and DMD units. The transmitter is a self-neutral stick type. The transmitter features a self-neutral stick-type transmitter with 10 function buttons that can be used for various operations with a single push, such as firing the main gun or machine gun of a tank, operating the horn of a truck, or turning on a light, as well as a trim lever (digital trim) for each channel. In addition to changing the function button settings, the user can also change the position of output channels (channel swap), forward/reverse rotation (channel reverse), and adjust endpoints and sub trims. A backlit LCD screen is provided to display the status of various settings. It can store independently set data for up to 15 units. Of course, 2.4GHz is used to allow multiple units to enjoy simultaneous operation without worrying about band (frequency). Transmitter and receiver are paired one-to-one to prevent interference.

[Equipped with 10 function buttons.]

A total of 10 function buttons, six on the lower left side of the front of the transmitter and two each on the left and right sides of the top face, allow for a single button press to fire the main gun or machine gun of the RC tank, turn the volume up or down, turn the lights on or off, or switch the RC trailer lights or horn sound. The “one-push” operation is all that's needed to perform these actions. This makes control even more fun. In addition, various information can be checked on the LCD screen, and the main screen constantly displays transmitter voltage, trim values, and other information, not to mention settings. The stick can also be adjusted to the desired length by loosening the 3mm screw on the tip and turning the stick (turn left to extend, turn right to retract).

[Basic specs] 

 TTU-11 transmitter: Operation method = 2 stick type 4 channels + 10 function buttons Transmission radio range = 2.4 GHz band Power source (sold separately) = 4 x 1.5 V AA alkaline batteries (rechargeable batteries cannot be used) Operating current = 140 mA max (at 6 V) ●TRU-11 receiver: Reception frequency Receiving frequency=2.4GHz band Power supply used 7.2V max. * Must be supplied from a unit with BEC circuit. Current consumption = 40mA (at 5V) Size = 38 x 27 x 18mm (excluding protrusions) Weight = 9.9g

<Caution>
This product cannot be used in combination with a transmitter (TTU-09) or receiver (TRU-09) other than this product (TTU-11, TRU-11).
When using an ESC (speed controller), be sure to use one with a built-in BEC. Tamiya ESCs TEU-101BK and TEU-104BK cannot be used because they do not have a built-in BEC.
Do not use this product for any purpose other than ground driving electric RC cars.
The receiver (TRU-11) is available at Tamiya Customer Service.
Functions not originally included in the MFC and DMD units will not work even if this product is used.