Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It's also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.

The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SG's 3-axis gyro support which makes the 14SG the perfect system for flybarless flight!

Features:
14 channels (12ch+2ch)
Compatible with 2.4GHz FASSTest, FASST and S-FHSS protocols
FASSTest telemetry compatible with telemetry sensors (sold separately)
Large(73.7 x 39.6mm) backlit LCD screen with 128 x 64 resolution
More language option (Japanese/English/Others)
Sensor Touch programming
S. Bus servo programming
4 vibration warning types
SD Card compatibility for external model memory and software updates
6V 1800mAh NiMH battery pack
Charger is 100V 

Airplane programing:
7 different wing types
3 different tail types
2 different rudder types
Flap setting menu
Differential ailerons
Aileron to camber flap mixing
Aileron to brake flap mixing
Aileron to rudder mixing
Rudder to aileron mixing
Rudder to elevator mixing
Camber mixing
Elevator to camber mixing
Camber flap to elevator mixing
Snap roll mixing
Airbrake mixing
V-Tail mixing
Ailvator
Winglet
Motor mixing
Fuel mixture mixing
Gyro mixing
Throttle curve (5-point)
Pitch curve (5-point)
Idle down

Specifications:
Type:2-stick
Channel:14 channels (12ch+2ch)
Modulation:FASSTest, FASST, S-FHSS, switchable2.4 GHz
Transmitter Frequency:2.4GHz band
Power Supply:6.0V HT5F1800B NiMH battery
Mode:2

Receiver:R7008SB
Modulation: FASSTest
RX Voltage Range: 3.5-8.4V 
Current drain: 75mA 
External Voltage Range: 0 - 70V DC 
Size: 24.9x47.3x14.3mm 
Weight: 10.9g

Included:
T14SGA Transmitter
R7008SB Receiver
6V 1800mAh NiMH Battery
Battery Charger
Instruction Manual
LiFe Spacer for optional FT2F2100B/FT2F1700B battery Pack
Switch Harness
Neck strap

Requires:
Servo of modeler's choice

Note:
[English Manual]