Description:

Lead time is in April (as of 01-28)

Beautiful aircraft have great flight performance.
Historically, masterpieces are beautiful aircraft.
Aiming for the best looking fuselage, we combined a 3D curved fuselage with a beautiful elliptical wing with excellent aerodynamic characteristics.
This is a finished aircraft that only Japan, with the world's best manufacturing technology, can produce.
The elegant, high-aspect appearance is also equipped with flaps.
Even if you don't do any fancy aerobatics, you will feel the graceful tropical breeze just by flying it. The SAITO FG-11 is the perfect power source.
Of course, other glow engines and electric motors are also available. Enjoy the most relaxing holiday with the ultimate purely domestic aircraft that has been carefully selected in every detail.

Suitable for intermediate level fliers
Completed with film applied
Gasoline engine
Glow engine
Electric specification

< Technical Data >

Overall length: 1268mm

Overall width: 1754mm
Wing area: 37.7 dm2
Overall Weight: 2300-2900g
 RC Mechanism: 7ch or more, 7 servos
 Power: SAITO FG-11 gasoline engine
 SAITO FG-11 gasoline engine or glow engine 2C-45 to 50, 4C-60 to 80 class
 or brushless motor
 Control channels AL(2), FL(2)RD, EV, TH or ESC

< Items required before flight >

[Common accessories]
Propo transmitter/receiver for airplanes
Instant adhesives OK Bond HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)

[In the case of SAITO FG-11]
SAITO FG-11 gasoline engine Use the attached engine mount.
Receiver battery
Servos Standard servos* x 3
Wing servo Tahmazo TS-D1018MC (48888) x4
Propeller APC propeller 13x6 (46175)
PILOT ST100mm (47498) x 4 extension cords (for connecting receiver, aileron and flap servos)
PILOT ST300mm (47500) (for aileron servo) x 2
PILOT Remote Kill Switch (47736)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)
Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more, manufactured by a radio manufacturer.

[In case other engines are installed]
Engine 2-cycle 45-50 class 4-cycle 60-80 class
Servos Standard servos* x 3
Wing servo Tahmazo TS-D1018MC (48888) x 4
PILOT ST100mm (47498) x 4 extension cords (for connecting receiver to aileron and flap servos)
PILOT ST300mm (47500) x 2 pcs (for aileron servo)
Receiver battery
Engine mount PILOT 31-82GN (33332) or PILOT 40-100GN (33387)
Fuel tank: Tank appropriate for the engine, e.g., PILOT fuel tank 320cc (33020)
APC propeller 13x6 (46175) 4 cycle
Fuel tube PILOT silicon tube, 2 colors, 1m each (33335)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)
(*Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more, manufactured by a radio manufacturer.

[For electric specification] 
Servo: Standard servo* x2
Wing servo Tahmazo TS-D1018MC (48888) x 4
PILOT ST100mm (47498) x 4 extension cords (for connecting receiver, aileron and flap servos)
PILOT ST300mm (47500) x 2 pcs (for aileron servo)
Motor Tahmazo ER-352077dBM(48766)** Motor mount
Motor mount PILOT Aluminum post motor mount 3053-53 (33348)** 
3x18mm cap screw x4 (for motor mount)
3mm washer x4
Speed controller Tahmazo Pro.
Battery Tahmazo LP-4S1P5000RE (48870)** 
Propeller APC propeller 11x8E (46421)** Propeller adapter PILOT PA
Propeller adapter PILOT PA5C8D (47455)***

Connector PILOT Gold Connector 5.5BL (33323)** or 6.0BS (33376)
Hook and loop fastener tape PILOT Tape fastener (with glue) red (33399), blue (33400) or yellow (33401)** 
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
Standard servos are servos with a width of 20 mm, length of 40 mm, and torque of 3.5 kg or more manufactured by a radio manufacturer.
PILOT ePack 45 (25203) is a recommended product that includes the items marked with ** with solder.

<Main Set Contents>

Wooden film-applied main and tail wings
Wooden film-applied fuselage
Carbon main wing scissors
Carbon main gear
Scale tail gear
Transparent plastic canopy
Gasoline fuel tank
Linkage rods
Color stickers
Japanese assembly instructions

The engine mount is not included in the kit.
This product is a film-applied finished ARF airplane. Some work is required to complete the kit, such as joining the main wings and loading the engine and mechanical components.
*Covering film may have some wrinkles due to its material. In such cases, the film can be removed by applying heat with a modeling iron to shrink the film.
*The contents, design, and colors of the set are subject to change without notice.