*ONLY JAPANESE KANA notation

(Discontinued)

Features

• Vertical compact charger with the function of two high-performance single chargers
• Can be installed in a limited space by putting all input/output units on the front and back sides
• Chargable from two ports at 100W simultaneously (maximum 200W output in total)
• Adopting XT60 type in main output unit to improve the power supply efficiency
• 2x16 LCD expressing in Japanese KANA
• Can operate independent ports by switching 4+1 buttons
• Both AC/DC input can be used regardless of situations
• The best charger suitable for stepping up from single charger

Specifications

• Battery: Li-Po / Li-Fe / Li-ion / Li-HV / Ni-MH / Ni-CD / PB
• Cell: Li-Po / Li-Fe / Li-Ion / Li-HV : 1-6cell    NiMH / Ni-Cd : 1-15cell   PB : 2-20V
• AC Input: 100-240 volts
• DC Input: 11-18 volts
• Charge Current :0.1-12.0A (Each Port Maximum 100W x 2)
• Discharge Current :0.1-2A (Each Port Maximum 10W x 2)
• Balance Port Current : Maximum 500mA / Cell
• Tricle charge current : 50-300mA / Off
• Memory : Maximum 10 memories
• Display type : 2 x 16 LCD
• Color of back light of display : Blue
• Security Timer : 1-720 minutes off
• Dimensions: 178 x 135 x 96 mm
• Weight: 850g

Funcitons

• Charging (Balance, Balance-less, Fast) Discharging/Storage (Charging/Dischanging for storing) <Li>  
• Charging(Charging, Auto-Charging) Discharging/Cycle/Repeak <Ni>  
• Charging(Normal, AGA, Cold)  Dischaging <Pb>  
• Battery Memory,
• TVC,
• Battery meter,
• Battery internal resistance meter,
• Various safety functions

   *1 Li-HV battery has higher voltage than Li-Po battery and it is a battery with a rated voltage of 3.8V and a charge completion voltage of 4.35V.

   *2 Be careful not to charge Li-Po battery in Li-HV mode. 

Included

• X2 AC Plus Vertical x1
• XT60 cable 2 pin T-type x1
• XT60 cable Tamiya type x1
• Balance converting cable (For Tamiya Li-Fe) x1
• Balance converting board (JST-XH Type) x2
• AC Input cable x1
• Manual x1