Description:

["2022” model with a greatly refined TG10-Mk.2FZ chassis]
 Based on the TG10-Mk.2 FZ, which is equipped with a 2.1cc displacement 12 engine for racing fun, the 2022 model has been further refined in terms of driving performance. It features a double-deck frame with narrow-type 3mm-thick aluminum lower and 2mm-thick carbon upper with low-profile steering servo specification. This reduces road interference during roll and enhances cornering performance by allowing the suspension to function properly. Another key point is that the steering servo has been repositioned for easier maintenance. The suspension is double wishbone 4-wheel independent with aluminum suspension mounts and plastic bushings for fine setting, and 3mm thick carbon damper stays are fitted with high performance short size big bore shocks. The drive system is shaft-driven 4WD with full bearings and universal-type front and rear driveshafts and propeller shafts to reduce power loss. In addition to the specially shaped bumpers, carbon bumper supports are included to increase body mount rigidity.

[Tamiya FS-12FZ engine with easy-to-manage characteristics ]
 The 2.1cc displacement Tamiya FS-12FZ engine has been tuned for power characteristics suitable for rubber tires. Equipped with a slide carburetor, aluminum heat sink head, aluminum lightweight flywheel, and TM-12 race tuned muffler and manifold set. The engine delivers both high power and linear torque characteristics. It also features ease of adjustment as well as easy handling with a recoil starter.

<Technical Data >

Overall length 373mm, overall width 196-200mm (variable)
 Wheelbase: 257mm
 Chassis material: 3mm-thick aluminum lower and 2mm-thick carbon upper double deck 
Tread F/R = 172 to 176 mm (variable) 
Differential gear system F/R = 4 bevels 
Steering tie rods: 3-part 
Suspension F/R: Double wishbones ● Damper: Short size big bore oil damper ● Gear ratio: 1st/2nd 7.02:1/5.42:1 
Muffler=TM-12 race-tuned muffler and manifold ●Drivetrain=Shaft-drive 4WD 
Full bearing specs 
Engine = FS-12FZ (2.1cc) 
Lightweight aluminum flywheel 
2-speed transmission 
Steel brakes and brake cam 
Fuel tank = 75cc

<Items to be purchased separately>

RC equipment: 2-channel radio set for engine cars and batteries for transmitting and receiving *Use a low-profile servo compatible with engine cars for the steering servo. Throttle servo is a standard size servo. 
Running fuel: Various types of glow engine fuel (nitro content 16-20%) Engine starting supplies: Plug heater & fuel pump 
Tires: Medium narrow size (24mm wide) touring car tires & wheels 
Body: SP.1578 RCE Raikiri GT (wide) spare body (51578), etc.