Description:

The 10-class balsa kit, sport plane “Cavallino” is laser-cut to produce a lightweight and accurate plane in a short time.
Recommended for those who have never tired of film-applied finished airplanes.
The kit includes a veneer motor mount so that it can be assembled as a 300W-class electric version.
An engine mount for the 10-15 is also included so that it can be built as an engine-powered airplane. The cowl is made of durable glass.
The 12% thin symmetrical wing allows you to enjoy the speed and nimble flight of this airplane.

Suitable for intermediate level fliers.
Balsa assembly kit
Glow engine version
Glow engine version

< Technical Data >

Overall length 867mm
Overall width 964mm
Wing area 16.6dm2
Overall weight 750-850g
Power: Brushless motor ER-221912dBM
or Glow engine 2C-10 class
RC mechanism 4 to 5ch-3 to 5 servos
Control AL, RD, EV, TH or ESC

< Items required before flight >

[Common items]
Aircraft radio transmitter/receiver (not for Parkfly)
Extension cord PILOT ST100mm (47498) x1 for aileron servo
Covering film A-film, etc.
PILOT Sponge Tire 45mm 2pcs (33118)
PILOT Sponge tire, 15mm, 2pcs (33220)
PILOT AB spinner 38mm white (33315) red (33316) carbon pattern (33381)
Hinge PILOT Easy Hinge S (32002)
Linkage Parts PILOT Single Thread Piano Wire 20/35 (33206)
Linkage Parts PILOT Plastic Parts Tree (33186)
PILOT Wheel Stopper Inner Diameter 3.1mm (33338)
PILOT VIP Iron Type-R (47058) Type-F (47826)
HD heat gun for film application (47404)
Scissors PILOT Serrated scissors (47783)
Asuka Film Bond(48259)
Instant adhesives OK Bond BW (43009), HW (43010), FX (43451)
Epoxy adhesives (30-minute curing type)
PILOT Balsa Canner (47875)
PILOT Sanding block (25042)
Sandpaper
Other general tools (cutter knife, screwdriver, etc.)
Stickers can be downloaded from the support page.

[For electric specification]
The material for the veneer motor mounting stand is included in the kit.
Servo Tahmazo TS-D1134MG(48908)x3 pcs.
Motor Tahmazo ER-221912dBM(48873)*Back mount and mounting screws are included.
Speed controller Tahmazo Pro.C A-30 (48827)
Battery LP-3S1P2200RE (48865)*
Propeller APC propeller 8x4E (46381)*
Propeller adapter PILOT PA3.18C6D (47628)*
Connector PILOT Gold Connector 4.0BL (33234)*
Battery charger Tahmazo LiPo battery charger (48451)
Soldering tools (soldering iron, solder with resin, etc.)
PILOT ePack 15 (25202) is a recommended product that includes the items marked with * with solder.

［In case of engine specification]
Receiver battery
Servos Tahmazo TS-D1134MG (48908) x 4
Engine: 2-cycle, 10-class
Silicon adhesive
Fuel tank PILOT fuel tank 120cc (33017)
Silencer
Extension
Adapter
APC propeller 7×4 (46053)
Fuel tube PILOT silicon tube pink 1m (33333) or blue 1m (33334)
Engine starting tools (pocket booster, fuel, starter, plug wrench, etc.)

［When using retractable legs]
Retractable leg PILOT Supra Retract 10 (47396)
Servo Small retractable leg servo

<Main Set Contents>

Laser cut wood material
Plank wood (body is pre-bent)
Glass cowling
Plastic canopy
Main and tail gears
Glass nylon engine mounts
Veneer mount for electric motor
Drawings (with Japanese assembly instructions)

*This aircraft is a balsa assembly kit.
*There are many parts that require skill and experience for production.